Detailed Product Description

It may interfere with or distort the image when install close to an electric or magnetic fields. Ex: TV, Speaker, etc.
Protect from humidity, dust and high temperatures
Do not install it where there is greasy smoke or steam, wherethe moisture may get too high, or where there is a lot of dust...
Do not install close to stoves, or other heat generating devices, such as spotlights, etc.
Avoid places where there is direct sunlight.
Cleaning
Do not directly touch the CCD element. Directly
INSTALLATION
MOUNTING THE LENS
C/CS MOUNT LENS TYPE
1.    Remove the protective cap from the cameras lens mount
2.   Install the C-mount adapter on the camera lens mount if using C-mount lens.
3.   Carefully align the CS/C Manual lens into the camera lens mount and turn clockwise slowly until it is firmly attached.
NOTE: Original camera is designed for CS mount lens type.
Auto IRIS LENS TYPE
1.    Remove the protective cap from the cameras lens mount
2.    Install the C-mount adapter on the camera lens mount if use C-mount lens.
3.    Carefully align the CS/C Manual lens into the camera lens, mount and turn clockwise slowly until it is firmly attached.
4.    Insert the cable Plug into the lens terminal socket located behind of the camera body. IRIS connector
     define see following fig.

IRIS JACK Video LENS DC-LENS
P1 +12V DUMP-
P2 N.C. DUMP+
P3 VIDEO DRIVE+
P4` GND DRIVE-
 

5.    Set the IRIS switch to DC position if use DC driver IRIS lens. Set the IRIS switch to Video position if use Video driver IRIS lens.
 POWER SUPPLY
1.    Before turning on the power to the camera, ensure that the lens is fitted onto the camera to avoid damage to the exposed CCD chipset.
2.    It must to use regulated power to camera, unregulated power maybe damage the camera.
3.    It needs to pay attention to pole of power when use DC power to terminal input, otherwise camera will be burn down.
 CONNECTION

 SPECIFICATION: